| Product Type |
CO₂ Incubator Analyser |
| Brand |
Geotech |
| Model |
G100 |
| Application |
IVF / ART / Medical Research / Incubator Verification |
| CO₂ Measurement Range |
0–20% CO₂ |
| CO₂ Sensor |
Dual-wavelength Infrared (IR) with reference channel |
| CO₂ Accuracy |
±1% of range after calibration* |
| CO₂ Response Time (T90) |
≤20 seconds |
| O₂ Measurement |
Optional |
| O₂ Range |
0–100% O₂ |
| O₂ Sensor |
Internal Electrochemical Cell |
| O₂ Accuracy |
±1% of range after calibration* |
| O₂ Response Time (T90) |
≤60 seconds |
| Temperature Measurement |
Optional, up to 2 probes |
| Temperature Range |
0–50°C |
| Temperature Accuracy |
±0.1°C from 32–44°C; ±0.2°C over the rest of range |
| Humidity Measurement |
Optional, 0–100% RH non-condensing |
| Humidity Accuracy |
±1.5% RH |
| Barometric Pressure |
800–1200 mbar |
| Pump Flow Rate |
Approximately 100 cc/min |
| Data Storage |
1,000 reading sets + 270 events |
| Communication |
USB Type-B Mini, HID device class |
| Alarm |
User-selectable visual & audible CO₂/O₂ alarms |
| Battery |
Li-Ion |
| Battery Life |
Up to 12 hours; approximately 10 hours with pump |
| Battery Lifetime |
Up to 600 cycles |
| Charging Time |
Approximately 4 hours |
| Power Supply |
5 V DC external power supply |
| Operating Temperature |
0–50°C |
| Operating Humidity |
0–95% RH, non-condensing |
| IP Rating |
IP40 |
| Dimensions (L × W × D) |
165 × 100 × 55 mm |
| Weight |
495 g |
| Display |
LCD, 128 × 64 pixels, RGB LED backlight |
| Gas Moisture Removal |
Built-in gas dryer tube |
| Water Trap Filter |
User-replaceable PTFE filter |
| Case Material |
ABS / Polypropylene with Silicone Rubber Inserts |
| Calibration |
User calibration supported |
| Optional Software |
Analyser Data Manager for data download & analysis |
|
|
